Perithecia on slate

Forums › Forums › Lichens › Perithecia on slate

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #33153
    SylviaD
    Participant

      Hi,

      I’m struggling with this verrucariaceae species found on slate. It has formed a mosaic on thin slivers of slate (all about 10-15cm long and 5-10cm wide) being used around a set of three Victorian tombs in a churchyard. The thalli size vary, but most are around 1-2cm and have a distinctive black edge at the border. The characteristics are as follows:

      Thallus: milk chocolate brown, cracked into small areoles about 0.5mm across with secondary cracking.

      Perithecia: crowded, with size ranges from 0.2-0.4mm. The perithecia are at least 2/3 immersed. It seems to have a very dark thick involucrellum, that doesn’t seem to reach very far down the exciple. The exciple seems to be relatively colourless around the base.

      Spores: Each ascus has 8 spores, with the size range 15-20 X 5-7.5 um, although a few measured up to 22-25 um I’ve attached photos and I think that the spores are more cylindrical than ellipsoid, a shape I haven’t encountered before in a Verrucariaceae species.

      I have attempted keying out in LGBI3 and I get to Parabagliettoa pinguicula, but I feel very uncertain about this, so any help would be much appreciated.

      Thank you,

      Sylvia

    Viewing 1 post (of 1 total)
    • You must be logged in to reply to this topic.
    Scroll to Top